No products in the cart.
Always Ready for Streaming
The C 338 has Chromecast built-in so you can cast music, tunes, podcasts, and playlists from your favourite apps on your phone, tablet or laptop to your stereo system. Plus, with Bluetooth® integrated and its added flexibility, your music streaming possibilities are truly limitless with the C 338.
Built-in Phono Stage for Vinyl Listening
Connect a turntable to the C 338 with its built-in phono preamp that applies the perfect amplification to your vinyl collection. Using a MM phono stage and an innovative low-noise circuit path, the C 338 can reproduce the warmth of LPs with accurate RIAA equalization and control the infrasonic noise that is in all recordings, without ever affecting the bass response.
With a wide array of connections, including a separate headphone amplifier that can drive high-impedance studio monitor headphones, the C 338 is ready for any type of listening. Line inputs can accommodate all kinds of analogue source components, offering ideal input impedance with linear ultra-low noise buffer amplifiers to preserve the musicality of recordings. Also connect a subwoofer with low impedance line outputs and extend the versatility of this budget-friendly, do-it-all amplifier.
- 50W x 2 Continuous Power into 8 or 4 ohms
- 90W / 150W / 200W IHF Dynamic Power into 8 / 4 / 2 Ohms
- First hi-fi amplifier to feature Chromecast built-in
- Integrated Bluetooth® for added music streaming flexibility
- Built-in Phono Preamp for Turntables
- Stereo Line, Optical Digital and Coax Digital inputs
- NAD Remote App support for tablet and smartphone
- Dedicated Headphone Amplifier
- Subwoofer Output
- TV Audio Input
- Bass EQ
- Continuous Output Power into 4 Ω and 8 Ω (Stereo)
- >50W (at rated THD, 20-20kHz, both channels driven)
- IHF Dynamic Power
- 2 Ω 210W
4 Ω 150W
8 Ω 80W
- <0.o3% (250mW to 50, 8 Ω and 4 Ω
- Signal/Noise Ratio
- >98dB (A-weighted, 500mV input ref. 1W out in 8 Ω)
- Clipping power
- >60W (at 1kHz 0.1% THD)
- Peak output current
- >18A (in 1 Ω, 1 ms)
- Damping Factor
- >300 (ref. 8 Ω, 20Hz and 6.5kHz)
- Frequency Response
- ±0.3 dB (20Hz-20kHz)
- Channel Separation
- 1kHz >75dB
- Input Sensitivity (For 50W in 8Ω)
- Line In: 380mV, Digital In: 18%FS
- Sample Rate
- Up to 192kHz/24bit
- Standby Power
- Dimensions (W x H x D)
- 435 x 70 x 285mm (17 1/8 x 2 13/16 x 11 1/4)”
- Net Weight
- 4.85kg (10.7lb)
- Shipping Weight
- 5.85kg (12.9lb)
Rega Planar 1
The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.
Performance beyond price
Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega’s bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.
If you are looking to get back into vinyl and want serious performance that will last you a lifetime, then look no further.
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.
Rega Carbon cartridge supplied fitted as standard.
24v synchronous motor
The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.
Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending)
Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.
New improved feet to increase stability and reduce vibration transfer.
Motor cover tray
New motor cover tray with integrated cooling.
New 111g ‘Plug and Play’ balance weight.
Plug and Play design, set-up in less than thirty seconds.
Hand assembled RB110 tonearm.
High quality, low vibration motor.
Phenolic resin, flywheel effect platter.
Factory fitted Carbon moving magnet cartridge.
Performance Pack aftermarket upgrade available (optional).
The Dynaudio Emit M10
The M10 is the most compact model of the new Emit range and the perfect entry to the world of high-end audio.
The Dynaudio Emit M10 offers authentic Dynaudio technology and performance at a most attractive price point. It features a 28 mm diameter soft dome tweeter and a 14 cm diameter MSP (Magnesium Silicate Polymer) mid/bass driver, mated to a 1st order crossover utilizing high-quality components throughout.
The M10 remains an incredibly easy to drive loudspeaker for virtually any amplifier, as it features a 6 ohm impedance. The expertly tuned bass-reflex cabinet ensures that a most impressive low frequency performance is achieved, especially for a speaker of such relatively modest proportions.
As the entry into the world of true high-end sound quality and authentic Dynaudio performance, the Emit M10 is an ideal compact loudspeaker at a most appealing price point.
Sensivity 86 dB IEC Long Term Power Handling > 150 W
Impedance (nominal) 6 ohms
Frequency Response (+/- 3 dB) 50 Hz – 23 kHz
Weight 5.6 kg
Dimensions (W x H x D mm) 170 x 292 x 240 (W x H x D inch) 6.7 x 11.5 x 9.4
|finish||satin black, satin white|